2/2-way ES solenoid valve G 1", 0,3 to 20 bar, open (NO) without power

Item number:

MO 210 ES 230V

pcs
Item description
Materials:
Body G 1/8" and G 1/4": 1.4104, G 1/2" to G 2": 1.4581 (internal parts 1.4104), seal: FKM

Temperature range:
-20 to +130 °C, ambience: -10 to +50 °C

Media:
Compressed air, neutral gases, water, neutral low-viscosity media, other media on request

Installation position:
With upright magnets, (G 3/8" - G 2" also with horizontal magnets)

Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages

Voltage tolerance:
± 10 %

Protection class:
IP 65 (plug size 3)

Information:
These valves are always supplied with a solenoid coil and a connector plug.

Warning:
For opening or closing, servo-controlled valves require a pressure difference between the valve inlet and valve outlet. The pressure difference is given as minimum pressure. There is a pressure compensation in the valve, resulting that no or little medium is used at the valve outlet, the valve will no longer function (it opens or closes unreliably).
Properties
Con­trol volt­age 230 V AC
func­tion open (NO) with­out power
Thread G 1"
Op­er­at­ing pres­sure [bar] 0,3 - 20
DN [mm] 25
L [mm] 95
Kv value* [l/min] 216
Power con­sump­tion (AC) [VA] 24
Struc­tural shape so­le­noid coil B
Spare so­le­noid coil MAG B 230V
Further information on MO210ES230V
Weight 1,4 kg / pcs
Customs duty number 84818073
Documents
*Water flow rate at +20°C, 1 bar pressure at the valve inlet, free discharge

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available